Bitperfect 3 2 0 Mm
BitPERFECT is the playlist for everything digital; be it digital music, movies, streaming etc. Yes, there is going to be a lot of discussion, plenty of reviews, so if you care not for vinyl, this. PHOENIX CONTACT page 2 of 7 Printed Circuit Screw Termination Blocks PT 1,5/-3,5-H 3.5 mm Pitch Description No. A mm Type Order No.
Description
Box 1359, Fairfield, TX 75840 Open daily Phone: (918) 244-2222. General edition: 82.0 x 74.5 x 17.0 mm Vim edition: 82.0 x 74.5 x 24.0 mm Thank's a lot in advance P.D; I've a Khadas tone board Vim edition on way to home. I choose this option thinking about future I2S and PDIF out connections. Without need to weld but at this momment.alone with my PC.
Every section of the Pro iDSD has received massive attention to detail. Classic design techniques for very low-noise design found in tube equipment have been combined with cutting-edge, 21st Century technology to deliver a superlative performance.
Studio Grade Remastering DSD1024
For the first time, Pro iDSD brings Studio Grade DSD1024 remastering to the mass. Now one can remaster all his/her music to a superlative DSD1024 format just like in a recording studio and enjoy the ultra-high resolution it provides.
Tube/ Solid-State Real-time Switching
Compared to high-end headphone amplifiers, the tube stage of the Pro iDSD is different in two-ways. First, we don’t use good-quality 6922s or similar. Instead we use the very best; General Electric 5670 which is the premium variant with a different pinout.
Quad Stack
The iDSD Pro uses a Quad ‘stack’ of iFi’s Bit-Perfect DSD and DXD DACs by Burr-Brown in a custom ‘interleaved’ configuration. This enables a total of eight pairs of differential signals to be used and mixed – four pairs of signals per channel.
Specifications
Bitperfect 3 2 0 Mm Equals
| Sample rates: | PCM up to 768kHz DSD up to 49.152MHz (DSD 1024) DXD and double-speed DXD (2xDXD) |
| Inputs: | USB (required for DSD, DXD and sample rates above 192KHz) AES3 (XLR – single link) S/PDIF (coaxial/optical combo) BNC multifunction (S/PDIF in or sync input) |
| Outputs: | Balanced XLR at 4.6V (+15.5dBu – HiFi) or 10V (+22dBu – Pro) Single-Ended RCA at 2.3V (HiFi) or 5V (Pro) Headphones 6.3mm & SE 3.5mm Jack at 0.55V/2.1V/5V Headphones BAL 2.5mm/4.4mm Jack at 1.13V/4.6V/10V Headphones out 1,500mW RMS X 2 @ 64 ohm, 4,000mW max. 2 X @ 16 Ohm |
| Headphone Output Impedance: | Single-Ended (S-BAL): < 1 Ω Balanced: < 2 Ω |
| Volume control: | Balanced (6-gang) Alps potentiometer, motorised with IR remote control XLR/RCA outputs can be selected as fixed level or adjusted 6.3mm headphone jack is always adjusted |
| Other Functions: | Various digital and analogue filters can be selected for DSD and PCM up to 384KHz |
| PCM Filters: | Bitperfect 44.1 – 192kHz, always used for 352.8 – 768kHz Bitperfect + 44.1 – 96kHz Gibbs Transient Optimised 44.1 – 384kHz Apodising 44.1 – 384kHz Transient Aligned 44.1 – 384kHz |
| DSD filters: | fixed 3rd order analogue filter @ 80kHz with correction for DSD’s -6dB gain |
| Gain (headphone section): | user-selectable: 0dB, 9dB and 18dB |
| Dynamic range: | 119dBA (solid-state, PCM, -60dBFS) |
| Output power | Pro iDSD 4.4mm socket. (16 Ω, balanced/single-ended): >4200mW /1>1,575mW Pro iDSD 2.5mm socket. (16 Ω, balanced/single-ended): >4000mW /1>1,500mW |
| Output voltage | (600Ω, balanced/single-ended): >11.2V / >5.6V |
| Input voltage (Pro iDSD): | DC 9V/6.7A – 18V/3.35A |
| Input voltage (iPower+): | AC 85 – 265V, 50/60Hz |
| Power consumption: | < 22W idle, 50W max. |
| Dimensions: | 213 (l) x 220 (w) x 63 (h) mm |
| Weight: | 1980g (4.37 Ibs) |